Varukorgen är tom.

Varukorg

STRIKE INDUSTRIES
RIFLE AK TO AR BUFFER TUBE ADAPTER

700598350463 100016868

Strike Industries stock adapter allows for the replacement of any standard fixed AK stock to be converted to accept an AR buffer tube assembly. This adapter is easy to install without any modifications to your AK. With no need to permanently alter the stock tang as it fits inside the adapter and tube. This product will take your AK into the twenty first century with the looks and the adjust-ability of a M4. Strike Industries also incorporated QD (quick disconnects) on both sides of the AK stock adapter.

SPECS: Length: 2.5", Weight: 4oz, Material: T6061 Aluminum.

Mer...

Strike Industries kolvadapter möjliggör ersättning av vilken standard fast AK-kolv som helst för att kunna använda en AR buffer tube assembly. Denna adapter är enkel att installera utan några modifieringar på din AK. Det finns inget behov av att permanent ändra kolvfästet eftersom det passar inuti adaptern och tuben. Denna produkt kommer att föra in din AK i tjugoförsta århundradet med utseendet och justerbarheten hos en M4. Strike Industries har även inkluderat QD (quick disconnects) på båda sidorna av AK-kolvadaptern.

SPECS: Längd: 2.5", Vikt: 4oz, Material: T6061 Aluminium.

Mer...

Kundernas betyg påSTRIKE INDUSTRIES AK TO AR BUFFER TUBE ADAPTER BLACK ALUMINUM

Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 3,8

does not fit (2015-05-29)

Sturdy design, but does not even come close to fitting C39V2 rifle from century

Fits Great - FOR STAMPED AK's ONLY! (2015-06-03)

The review below me tried fitting it on a milled AK (C39v2). The Brownells video states it's for STAMPED AK's only. Fit well on my DDI stamped AK.

Worth getting to modify your AK (2015-09-05)

I received the product 3 days before it was schedule to arrive, so my 'hats off' to Brownells for their speed of processing delivery. The part fit into my Warsa 10/63 lower receiver without any problems. It is made of the same strong material used in a lot of today's AR's, and the location for the QD attachments is where I like them to be. With the stock fully collapsed, it is a half inch shorter than the standard AK stock, fully extended it is as long as an A2 stock for those that like the longer length of pull.

The only 2 issue's I did have was; (1) the lack of a proper fitting allen key tool to set the lock screw for the buffer tube and the two mounting screws, (2) I had to use a sanding wheel to grind down the edge of the mounting screw that went under the recoil spring/ locking latch for the dust cover to get it to fit flush with the surface and have everything mount properly back into place on the receiver. Other than those two minor issues, this is a great product for anyone who wants to mount an AR collapsible butt stock to their AK 47/74 rifle's. I would have given it 5 stars instead of 4, if it was not for having to do a little work when I was installing the part.

So far, so good (2015-10-25)

I researched this item and went back and forth between it and the rifle dynamics version. This one is half price and when "chatting" with the Brownell's rep, he said I could return it if didn't work out. Well, I figured that was worth a try. The unit fit well on my Saiga with some minor fitting of the mounting screw (filing). However, there are no directions and there are two pieces that fit inside the adapter that I truly don't know what their purpose is. That said, it fit well and looks good. I put a Magpul MOE stock on the AK. The length of the stock with the adapter is outstanding. Time will tell as to durability, but so far I'm very happy.

Exellent product, but... (2018-02-16)

Excellent adapter, very well made.

The best if you plan on using the iron sights as the tube comes lower then on any other similar adapters.

Only caveat is that requires quite a LOT of fitting to install on Norinco; the receiver of T56 is made of 1.5 mm steel compared to most East Block AKs where the material is 1 mm â so the inner diameter is smaller then on most models.

Also, the Chinese tang is about 6 mm longer then standard, so the holes do not fit (see the pic â after taking it, I ended up filing the rear tang hole so it aligns with the hole on the adapter)

I filed the sides and the "forehead" of the part of the adapter that goes inside the receiver, and filed the rear tang screw hole some â now it fits tight and very solid, even without the adjustment pieces.

<img width="500" src='/userdocs/reviewimages/c70e0c1a-d3be-4dee-9d83-9353443560d7.jpg' alt=''>

Läs 5 fler betyg på brownells.com

649 649 1 SEK

Produktnr: 100016868
STRIKE INDUSTRIES AK TO AR BUFFER TUBE ADAPTER BLACK ALUMINUM
Tillverkarens produktnummer: SIAKSA 700598350463 Strike Industries kolvadapter möjliggör ersättning av vilken standard fast AK-kolv som helst för att kunna använda en AR buffer tube assembly. Denna adapter är enkel att installera utan några modifieringar på din AK. Det finns inget behov av att permanent ändra kolvfästet eftersom det passar inuti adaptern och tuben. Denna produkt kommer att föra in din AK i tjugoförsta århundradet med utseendet och justerbarheten hos en M4. Strike Industries har även inkluderat QD (quick disconnects) på båda sidorna av AK-kolvadaptern.

649 SEK 3 649,00 kr *

Levernastid ca. 14-21 dagar.
3 st. i centrallagret.

Funktioner: Finish: Svart Material: Aluminum

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Produktinformation

Finish: Svart Material: Aluminum Leveransvikt: 0,125kg Leveranshöjd: 44mm Leveransbredd: 44mm Leveranslängd: 70mm

Produkt detaljer

USA: s exportklassificering: 0A501.y.1

SPECS: Length: 2.5", Weight: 4oz, Material: T6061 Aluminum.

Mer...

SPECS: Längd: 2.5", Vikt: 4oz, Material: T6061 Aluminium.

Mer...

Kundernas betyg påSTRIKE INDUSTRIES AK TO AR BUFFER TUBE ADAPTER BLACK ALUMINUM

Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 3,8

does not fit (2015-05-29)

Sturdy design, but does not even come close to fitting C39V2 rifle from century

Fits Great - FOR STAMPED AK's ONLY! (2015-06-03)

The review below me tried fitting it on a milled AK (C39v2). The Brownells video states it's for STAMPED AK's only. Fit well on my DDI stamped AK.

Worth getting to modify your AK (2015-09-05)

So far, so good (2015-10-25)

Exellent product, but... (2018-02-16)

Läs 5 fler betyg på brownells.com

Kunder har även köpt

SPRINGFIELD ARMORY M14 CASTLE NUT
M14 CASTLE NUT

SPRINGFIELD ARMORY

Order kan placeras

239,00 kr *

HOGUE PISTOL GRIP RUBBER BLACK
AR-15 PISTOL GRIP

HOGUE

Lagervara

469,00 kr *

Pistolgrepp

4,8

MOUNTING SOLUTIONS PLUS 9" RAIL BLANK
PICATINNY RAIL BLANK

MOUNTING SOLUTIONS PLUS

Lagervara

749,00 kr * 549,00 kr - 1 249,00 kr*

Gevär Baser

MAGPUL AR-15 MOE-SL STOCK COLLAPSIBLE MIL-SPEC BLK
AR-15 MOE-SL STOCK COLLAPSIBLE MIL-SPEC

MAGPUL

Lagervara

1 099,00 kr *

Bakkolvar

4,7

LUTH-AR AR-15/308 6-POSITION COMMERCIAL CARBINE BUFFER TUBE
AR-15/308 6-POSITION COMMERCIAL CARBINE BUFFER TUBE

LUTH-AR

Lagervara

489,00 kr *

Buffer Tuber

Logga in

Har du glömt lösenordet?
Registrering

SOCIAL MEDIA

Facebook

HEMSIDA

PRODUKTKATEGORI

BESTÄLLNING

KUNDSERVICE

Välkommen!

Välkommen till brownells.se, den ledande leverantören av skyttetillbehör, unika vapendelar, vapenrelaterade produkter, laddutrustningar, laddverktyg, kulor & hylsor, optik & vapensmide samt andra produkter för att underhålla, reparera och uppgradera dina vapen! Du kommer att hitta över 90.000 produkter till bra priser, stor lagerhållning samt brett utbud!

Vårt erbjudande:

Gillar du att skjuta, är vapensmed eller jägare, är detta platsen för dig! Skyttar, professionella vapensmeder, hobbyanvändare, militär/polis och pistolanvändare vänder sig till brownells.se för att hitta vapendelar och produkter av hög kvalitet.

cf-web-badges-e-ltgray