Shock-absorbing polyurethane buffer replaces the bolt stop pin to eliminate metal-to-metal contact and extend receiver life. Cushions the bolt’s rearward motion to help prevent receiver cracking, reduce felt recoil, and enable quieter cycling.
SPECS: Polyurethane. Fits 10/22 in .22 LR only. This buffer may be manufactured in various colors but when properly installed it will not be visible.
Mer...
Hjälper till att förlänga mottagarens livslängd & minska kännbar rekyl
Stötdämpande buffer av polyuretan ersätter bultstoppstiften för att eliminera kontakt mellan metall och förlänga livslängden på mottagaren. Dämpar bultens bakåtrörelse för att hjälpa till att förhindra sprickbildning i mottagaren, minska kännbar rekyl och möjliggöra tystare laddningscykler.
SPECS: Polyuretan. Passar 10/22 endast i .22 LR. Denna buffer kan tillverkas i olika färger men när den är korrekt installerad kommer den inte att vara synlig.
Antal betyg: 9
Från brownells.com: 9
Medelbetyg: 2,6
Good product.(2011-11-29)
Easy to install and works as described.
Poor Quality Control, Uneven Ends(2011-12-21)
The buffer provided looks nothing like the picture and is jet black, it is cut too short and at an angle on one end. Really poor quality control... it will probalby do the job but will look unfitted.
Works Okay(2012-05-08)
There's no rocket science going into this part. I can't really tell if it reduces felt recoil (and doubt that it does) but it makes sense that it would extend the life of the receiver and bolt. For this price, I don't see how this can be a bad thing.
TacSol should be embarrassed(2012-06-03)
Like the other reviewer said, a filmsy plastic tubing, poorly cut. I think the packaging costs more than the product itself. Anyone could go to a hardware store and buy a roll of cheap plastic tubing and cut it to size, which is what it looks like they did.
I would send it back, but shipping will cost more than the part itself.
DO NOT BUY!
bought two bad mistake(2012-11-01)
buffer pins are not straight ends sheared off and not perpindicular also too short
Waste of money(2013-01-16)
Quality was poor, ends not cut straight and cylinder was slighty disformed. Item fits snugly but will not go all the way through. Even added a drop of breakfree and did not help. Using the slightest hand pressure exerted to make it flush, the end will mushroom. Buy at your own risk...
Easy install(2016-10-16)
The one I received was a better fit than the factory installed seel buffer that fell out once receiver was removed from stock. Well made good fit.
run away(2018-01-22)
I love most all of Tactical Solutions products but not this one.
too difficult to install(2018-02-02)
may work for the intended purpose, but way too difficult to install. they will never go back in when I remove them to remove bolt.
Produktnr: 100006001 TACTICAL SOLUTIONS, LLC 10/22 SHOCK BUFFER Tillverkarens produktnummer: XRACCBF879971001961 Stötdämpande buffer av polyuretan ersätter bultstoppstiften för att eliminera kontakt mellan metall och förlänga livslängden på mottagaren. Dämpar bultens bakåtrörelse för att hjälpa till att förhindra sprickbildning i mottagaren, minska kännbar rekyl och möjliggöra tystare laddningscykler.
159SEK1159,00 kr
*
Levernastid ca. 14-21 dagar. 1 st. i centrallagret.
Tillverkas i USA
USA: s exportklassificering: 0A501.x
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Shock-absorbing polyurethane buffer replaces the bolt stop pin to eliminate metal-to-metal contact and extend receiver life. Cushions the bolt’s rearward motion to help prevent receiver cracking, reduce felt recoil, and enable quieter cycling.
SPECS: Polyurethane. Fits 10/22 in .22 LR only. This buffer may be manufactured in various colors but when properly installed it will not be visible.
Mer...
Hjälper till att förlänga mottagarens livslängd & minska kännbar rekyl
Stötdämpande buffer av polyuretan ersätter bultstoppstiften för att eliminera kontakt mellan metall och förlänga livslängden på mottagaren. Dämpar bultens bakåtrörelse för att hjälpa till att förhindra sprickbildning i mottagaren, minska kännbar rekyl och möjliggöra tystare laddningscykler.
SPECS: Polyuretan. Passar 10/22 endast i .22 LR. Denna buffer kan tillverkas i olika färger men när den är korrekt installerad kommer den inte att vara synlig.
Antal betyg: 9
Från brownells.com: 9
Medelbetyg: 2,6
Good product.(2011-11-29)
Easy to install and works as described.
Poor Quality Control, Uneven Ends(2011-12-21)
The buffer provided looks nothing like the picture and is jet black, it is cut too short and at an angle on one end. Really poor quality control... it will probalby do the job but will look unfitted.
Works Okay(2012-05-08)
There's no rocket science going into this part. I can't really tell if it reduces felt recoil (and doubt that it does) but it makes sense that it would extend the life of the receiver and bolt. For this price, I don't see how this can be a bad thing.
TacSol should be embarrassed(2012-06-03)
Like the other reviewer said, a filmsy plastic tubing, poorly cut. I think the packaging costs more than the product itself. Anyone could go to a hardware store and buy a roll of cheap plastic tubing and cut it to size, which is what it looks like they did.
I would send it back, but shipping will cost more than the part itself.
DO NOT BUY!
bought two bad mistake(2012-11-01)
buffer pins are not straight ends sheared off and not perpindicular also too short
Waste of money(2013-01-16)
Quality was poor, ends not cut straight and cylinder was slighty disformed. Item fits snugly but will not go all the way through. Even added a drop of breakfree and did not help. Using the slightest hand pressure exerted to make it flush, the end will mushroom. Buy at your own risk...
Easy install(2016-10-16)
The one I received was a better fit than the factory installed seel buffer that fell out once receiver was removed from stock. Well made good fit.
run away(2018-01-22)
I love most all of Tactical Solutions products but not this one.
too difficult to install(2018-02-02)
may work for the intended purpose, but way too difficult to install. they will never go back in when I remove them to remove bolt.