Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige
793811766035 430105358
The Strike Shotgun Barrel Clamp for 12-Guage helps to add strength and rigidity to your feed tubs with the ability to add accessories and a sling point. One side of the barrel clamp features a Picatinny (Pic) rail to mount a weapon light or other accessory. On the other side you have a 360° free swivel quick detach (QD) socket for an easy sling attachment point. The user can pick which side you want the Pic rail or QD to be. Compatible with the most common 12-Guage barrels and feed tubes, this lightweight barrel clamp is machined from 6061-T6 aluminum. This Strike Shotgun Barrel Clamp for 12-Guage provides additional support for your magazine feed tubes with the bonus of having a QD sling point on one side and a Picatinny rail accessory on the other that is quick and easy to install. Available in anodized SI BLACKLINE, FDELINE or TITAN EDITION colors. COMPATIBILITY: 12-Gauge models only Benelli M2/M4 Remington 870 Possibly other 12-Gauge shotguns not officially tested by SI NOT COMPATIBLE: With some special version models even mentioned above Mossberg 500, 930 Package Contents: x1 Strike Shotgun Barrel Clamp QD side x1 Strike Shotgun Barrel Clamp Picatinny side x2 Set screw (M5x14mm) x1 Hex tool [4mm] x1 Loctite® Threadlocker Blue 243® x1 Warning card Product Features: Picatinny rail to mount a weapon light or other accessory 360° free swivel QD socket for an easy sling attachment point Quick and easy installation with rail or QD socket on either side Compatible with most common 12-Gauge barrels and feed tubes Lightweight and high-strength Machined from 6061-T6 aluminum WARNING: Due to metal on metal contact, there is always a chance of marring finish/coating Before every use, always check proper function of your QD mount and any wear and tear from use Always have your weapon in the SAFE position when not being fired Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
749 749 1 SEK
Produktnr: 430105358
STRIKE INDUSTRIES SHOTGUN BARREL CLAMP FOR 12-GAUGE IN BLACK 793811766035 Strike Shotgun Barrel Clamp för 12-kaliber bidrar till att öka styrkan och styvheten i dina matarrör med möjligheten att lägga till tillbehör och en fästpunkt för vapenrem. Ena sidan av pipklämman har en Picatinny (Pic) rail för montering av en vapenlampa eller annat tillbehör. På andra sidan finns en 360° fri svängbar snabbkopplings (QD) sockel för en enkel fästpunkt för vapenrem. Användaren kan välja vilken sida du vill ha Pic rail eller QD på. Kompatibel med de vanligaste 12-kaliber piporna och matarrören, denna lätta pipklämma är bearbetad från 6061-T6 aluminium. Denna Strike Shotgun Barrel Clamp för 12-kaliber ger extra stöd för dina magasinsmatarrör med bonusen att ha en QD fästpunkt för vapenrem på ena sidan och en Picatinny rail tillbehör på den andra som är snabb och enkel att installera. Finns i anodiserade SI BLACKLINE, FDELINE eller TITAN EDITION färger. KOMPATIBILITET: Endast 12-kaliber modeller Benelli M2/M4 Remington 870 Möjligen andra 12-kaliber hagelgevär som inte officiellt testats av SI INTE KOMPATIBEL: Med vissa specialversioner även nämnda ovan Mossberg 500, 930 Paketinnehåll: x1 Strike Shotgun Barrel Clamp QD-sida x1 Strike Shotgun Barrel Clamp Picatinny-sida x2 Inställningsskruv (M5x14mm) x1 Hexverktyg [4mm] x1 Loctite® Threadlocker Blue 243® x1 Varningskort Produktfunktioner: Picatinny rail för montering av vapenlampa eller annat tillbehör 360° fri svängbar QD-sockel för en enkel fästpunkt för vapenrem Snabb och enkel installation med rail eller QD-sockel på valfri sida Kompatibel med de vanligaste 12-kaliber piporna och matarrören Lätt och hög hållfasthet Bearbetad från 6061-T6 aluminium VARNING: På grund av metall mot metall kontakt finns alltid en risk för att märka av finish/beläggning Före varje användning, kontrollera alltid korrekt funktion av din QD-fäste och eventuellt slitage från användning Ha alltid ditt vapen i SAFE-läge när det inte avfyras Följ alltid alla vapensäkerhetsregler och peka aldrig ditt vapen mot något du inte är villig att förstöra -CALIFORNIA PROPOSITION 65 VARNING:- VARNING: Denna produkt innehåller kemikalier som är kända av delstaten Kalifornien för att orsaka cancer och fosterskador eller andra reproduktiva skador. För mer information: www.P65Warnings.ca.gov
749 SEK 3 749,00 kr *
Levernastid ca. 14-21 dagar.
3 st. i centrallagret.

Produktinformation

Leveransvikt: 0,077kg Leveranshöjd: 38mm Leveransbredd: 51mm Leveranslängd: 102mm




The Strike Shotgun Barrel Clamp for 12-Guage helps to add strength and rigidity to your feed tubs with the ability to add accessories and a sling point. One side of the barrel clamp features a Picatinny (Pic) rail to mount a weapon light or other accessory. On the other side you have a 360° free swivel quick detach (QD) socket for an easy sling attachment point. The user can pick which side you want the Pic rail or QD to be. Compatible with the most common 12-Guage barrels and feed tubes, this lightweight barrel clamp is machined from 6061-T6 aluminum. This Strike Shotgun Barrel Clamp for 12-Guage provides additional support for your magazine feed tubes with the bonus of having a QD sling point on one side and a Picatinny rail accessory on the other that is quick and easy to install. Available in anodized SI BLACKLINE, FDELINE or TITAN EDITION colors. COMPATIBILITY: 12-Gauge models only Benelli M2/M4 Remington 870 Possibly other 12-Gauge shotguns not officially tested by SI NOT COMPATIBLE: With some special version models even mentioned above Mossberg 500, 930 Package Contents: x1 Strike Shotgun Barrel Clamp QD side x1 Strike Shotgun Barrel Clamp Picatinny side x2 Set screw (M5x14mm) x1 Hex tool [4mm] x1 Loctite® Threadlocker Blue 243® x1 Warning card Product Features: Picatinny rail to mount a weapon light or other accessory 360° free swivel QD socket for an easy sling attachment point Quick and easy installation with rail or QD socket on either side Compatible with most common 12-Gauge barrels and feed tubes Lightweight and high-strength Machined from 6061-T6 aluminum WARNING: Due to metal on metal contact, there is always a chance of marring finish/coating Before every use, always check proper function of your QD mount and any wear and tear from use Always have your weapon in the SAFE position when not being fired Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Nyhetsbrev