Varukorgen är tom.

Varukorg

0247-41085

Prenumerera på nyhetsbrev

CHOATE
SPRINGFIELD M1 CARBINE STOCK ADJUSTABLE

681920835530 159250031

Increases Grip Area For More Accurate Semi-Auto Shooting

Faster handling and faster pointing than conventional rifle stocks. ¾" longer length of pull than the factory or issue stock gives increased shooting comfort and a better fit. Drop-in design means no fitting required. Made from lightweight DuPont Zytel® plastic for the ultimate in stability and strength. All models include 1" rubber recoil pad and 1" sling swivel loops. It will only fit Military version of the M1, will not fit the universal model M1 or non-mil spec clones.

SPECS: Zytel plastic, black, textured finish. 29" (73cm) long, 1lb. 6 oz.(632 g) wt.

Mer...

Ökar Greppytan För Mer Exakt Halvautomatisk Skytte

Snabbare hantering och snabbare riktning än konventionella gevärskolvar. ¾" längre draglängd än fabriks- eller standardkolven ger ökad skjutkomfort och en bättre passform. Drop-in design innebär att ingen anpassning krävs. Tillverkad av lättviktig DuPont Zytel® plast för ultimat stabilitet och styrka. Alla modeller inkluderar 1" gummirekyldyna och 1" rembygelfästen. Passar endast militärversionen av M1, passar inte universella modellen M1 eller icke-militärspecifika kloner.

SPECS: Zytelplast, svart, texturerad yta. 29" (73cm) lång, 1lb. 6 oz.(632 g) vikt.

Mer...

Kundernas betyg påCHOATE SPRINGFIELD M1 CARBINE STOCK ADJ PLASTIC BLK

Antal betyg: 2
Från brownells.com: 2
Medelbetyg: 2,5

Stock has potential but issues (2016-10-15)

I bought this for an Auto ordnance M1 Carbine.

here is the good the bad the ugly:

The good:

It has a good profile. It gives a longer length of pull which for tall guys like me Is a god send. It feels more like a normal rifle while still remaining light and handy.

With a synthetic stock the gun is now less prone from changing zeros and group shift due to humidity and rain.

The built in sling mounts are convenient and do not require the oiler bottle to use.

The Bad:

The overall quality was so so. The stock came with moulding flash still on it, it was incredibly tight to get a receiver into and needed some sanding. It is not a well finished product. It does clean up nice but you will have to hit it with a file and sandpaper.

the stock profile is not compatible with auto ordnance upper hand guards, If you have an auto ordnance model, fear not; with a standard GI profile vented steel upper handguard available off brownells you are good to go.

You will have to dremel the stock to get a scout rail handguard to fit.

The Ugly:

the stock did not come with a rear recoil lug. You must provide your own which means buying one aftermarket or stripping it off your own M1 stock.

It is not compatible with the recoil lug from Auto ordnance, Plainfield, or Paratrooper stocks. yes I tried all three to no avail.

you must use a standard GI one (which is compatible with auto ordinance and plainfield)

it also requires a barrel band retaining spring. I wish these requirement were listed as a requirement on the product as i had to put in a second order to get them.

Lots of fitting required (2016-10-24)

First off, it is not compatible with paratrooper recoil lugs.

Nor is this stock compatible with Auto ordinance upper hand guards.

This stock is tight, you need to beat the recoil lug in with a mallet.

you also need a rubber mallet to get the receiver in.

once the receiver is inserted into the recoil lug and you cam it down, it will stop with the forend 2 inches away from the barrel where the band sits. you either need to bend the stock and it will put about 30-40 LB of pressure on the barrel band... or you need to mill out the stock. You can do it with a dremel and a file but its going to take a long time. Its much easier in a end mill. you need to remove 1/16 to 1/8 of material along the receiver supports, remove material around the trigger assembly, mill the recoil lug pocket out so that it sits flat and square. and a few more points of contact that well... shouldn't be contacting. It is a lot of work.

Once that's done it looks nice, feels nice, and is a more comfortable sitting stock for tall people like myself.

Läs 2 fler betyg på brownells.com

1749 1749 1 SEK

Produktnr: 159250031
CHOATE SPRINGFIELD M1 CARBINE STOCK ADJ PLASTIC BLK
Tillverkarens produktnummer: CMT080102 681920835530 Snabbare hantering och snabbare riktning än konventionella gevärskolvar. ¾" längre draglängd än fabriks- eller standardkolven ger ökad skjutkomfort och en bättre passform. Drop-in design innebär att ingen anpassning krävs. Tillverkad av lättviktig DuPont Zytel® plast för ultimat stabilitet och styrka. Alla modeller inkluderar 1" gummirekyldyna och 1" rembygelfästen. Passar endast militärversionen av M1, passar inte universella modellen M1 eller icke-militärspecifika kloner.

1749 SEK 5 1 749,00 kr *

Levernastid ca. 14-21 dagar.
5 st. i centrallagret.

Funktioner: Färg: Svart Make: Springfield Material: Plastic Modell: M1 Carbine Stil: M1

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Produktinformation

Färg: Svart Make: Springfield Material: Plastic Modell: M1 Carbine Stil: M1 Leveransvikt: 0,699kg Leveranshöjd: 51mm Leveransbredd: 152mm Leveranslängd: 737mm

Produkt detaljer

Tillverkas i USA
USA: s exportklassificering: 0A501.y.1

Increases Grip Area For More Accurate Semi-Auto Shooting

SPECS: Zytel plastic, black, textured finish. 29" (73cm) long, 1lb. 6 oz.(632 g) wt.

Mer...

Ökar Greppytan För Mer Exakt Halvautomatisk Skytte

SPECS: Zytelplast, svart, texturerad yta. 29" (73cm) lång, 1lb. 6 oz.(632 g) vikt.

Mer...

Kundernas betyg påCHOATE SPRINGFIELD M1 CARBINE STOCK ADJ PLASTIC BLK

Antal betyg: 2
Från brownells.com: 2
Medelbetyg: 2,5

Stock has potential but issues (2016-10-15)

Lots of fitting required (2016-10-24)

Läs 2 fler betyg på brownells.com

Logga in

Har du glömt lösenordet?
Registrering

SOCIAL MEDIA

Facebook

HEMSIDA

PRODUKTKATEGORI

BESTÄLLNING

KUNDSERVICE

Välkommen!

Välkommen till brownells.se, den ledande leverantören av skyttetillbehör, unika vapendelar, vapenrelaterade produkter, laddutrustningar, laddverktyg, kulor & hylsor, optik & vapensmide samt andra produkter för att underhålla, reparera och uppgradera dina vapen! Du kommer att hitta över 90.000 produkter till bra priser, stor lagerhållning samt brett utbud!

Vårt erbjudande:

Gillar du att skjuta, är vapensmed eller jägare, är detta platsen för dig! Skyttar, professionella vapensmeder, hobbyanvändare, militär/polis och pistolanvändare vänder sig till brownells.se för att hitta vapendelar och produkter av hög kvalitet.

cf-web-badges-e-ltgray