Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige
100024968
Upgrade Performance by Upgrading Your Trigger
The S&W M&P 1.0 drop-in trigger kit uses the Agency Arms Flat=Faced Trigger Shoe, and is paired with the Apex Tactical Specialties forward set sear kit. The Apex forward set sear shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear, while the ultimate striker block delivers a smoother trigger pull and reduces almost all false reset by improving the radius on the striker block face. The S&W M&P 1.0 drop-in trigger kit forward set springs kit produces a trigger pull of 3.0 to 4.0 pounds, depending on the trigger return spring installed. Not recommended for duty/carry applications Requires the use of the sear housing block designed for the large size sear plunger and spring The S&W M&P 1.0 drop-in trigger kit does not fit the 2.0, Shield, Bodyguard, 22 or 22 Compact pistols.
3149 3149 1 SEK
Produktnr: 100024968
AGENCY ARMS S&W M&P 1.0 DROP-IN TRIGGER KIT
Tillverkarens produktnummer: AADITMP S&W M&P 1.0 drop-in trigger kit använder Agency Arms Flat-Faced Trigger Shoe och är kombinerat med Apex Tactical Specialties forward set sear kit. Apex forward set sear förkortar avtryckarens slag genom att släppa slagstiftet vid en punkt längre fram än fabrikssearen, medan ultimate striker block ger en mjukare avtryckare och minskar nästan alla falska återställningar genom att förbättra radien på striker blockets yta. S&W M&P 1.0 drop-in trigger kit forward set springs kit ger en avtryckarvikt på 3.0 till 4.0 pund, beroende på vilken återfjädringsspiral som installeras. Rekommenderas inte för tjänst/vapenbärande applikationer Kräver användning av sear housing block designat för den stora storleken på sear plunger och fjäder S&W M&P 1.0 drop-in trigger kit passar inte 2.0, Shield, Bodyguard, 22 eller 22 Compact pistoler.
3149 SEK 27 3 149,00 kr *
Levernastid ca. 14-21 dagar.
Mer än 10 st. i centrallagret.
Funktioner: Finish: Svart Make: Smith & Wesson Modell: M&P Stil: Drop-In

Produktinformation

Finish: Svart Make: Smith & Wesson Modell: M&P Stil: Drop-In Leveransvikt: 0,027kg Leveranshöjd: 13mm Leveransbredd: 76mm Leveranslängd: 127mm

Produkt detaljer

Tillverkas i USA
USA: s exportklassificering: 0A501.c



Upgrade Performance by Upgrading Your Trigger
The S&W M&P 1.0 drop-in trigger kit uses the Agency Arms Flat=Faced Trigger Shoe, and is paired with the Apex Tactical Specialties forward set sear kit. The Apex forward set sear shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear, while the ultimate striker block delivers a smoother trigger pull and reduces almost all false reset by improving the radius on the striker block face. The S&W M&P 1.0 drop-in trigger kit forward set springs kit produces a trigger pull of 3.0 to 4.0 pounds, depending on the trigger return spring installed. Not recommended for duty/carry applications Requires the use of the sear housing block designed for the large size sear plunger and spring The S&W M&P 1.0 drop-in trigger kit does not fit the 2.0, Shield, Bodyguard, 22 or 22 Compact pistols.
Nyhetsbrev