SWITCHBACK 2.0 LARGE FLASHLIGHT RING WITH POCKET CLIP The SwitchBack® 2.0 adds a multi-function finger ring and robust pocket clip to your tactical flashlight. It mounts securely between the light’s tailcap and body, providing a repeatable grip index during deployment from pocket or pouch, and enhances ergonomics while shooting or searching. The SwitchBack® 2.0 is the next evolution in the innovative SwitchBack Flashlight Ring product line. It incorporates new features and refinements based on thousands of hours of use by our subject matter experts and customers. The SwitchBack mounts between the tailcap and body of your flashlight, making it secure regardless of impact, moisture, and heat/cold changes. FEATURES: SwitchBacks can be used with handguns or long guns. It allows the user to: Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm, reloading, and addressing a malfunction. The SwitchBack provides fast deployment and enhanced retention during many activities such as climbing, backpacking, car and home maintenance, and self-defense. New for SwitchBack 2.0: A finger ring that releases under heavy force/torque but can be reset. A stronger pocket clip that also works with MOLLE/PALS webbing. A pocket clip position that allows for slightly deeper carry than the SwitchBack® Large (original). A tubular portion that is cut lower to allow grip on both sides of the tail-cap during installation. A wider thumb rest with traction features. Small crush ribs on the SwitchBack 2.0’s lip that create a custom fit across a broader range of lights. An aluminum spacer that expands compatibility to Streamlight HL and HL-X flashlights and other manufacturers with similar designs. Installation For installation, first try installing the SwitchBack on your light without use of the O-ring or aluminum washer. Simply unscrew the tailcap, add the SwitchBack, and rescrew the tailcap back on. If the light does not activate upon use of the tailcap switch with the SwitchBack installed, try installing the aluminum washer as shown in the diagram below. Streamlight models tend to require the aluminum washer, but may not, depending on the tailcap features of the light. Elzetta and Surefire models do not usually require the aluminum washer, but users may find that addition of the rubber O-ring will help to stabilize the position of the SwitchBack
Uppgradera din taktiska ficklampa med SwitchBack 2.0!
SwitchBack 2.0 LARGE FLASHLIGHT RING MED POCKET CLIP är den perfekta lösningen för att förbättra din upplevelse med ficklampor. Denna innovativa produkt från THYRM LLC erbjuder en multifunktionell finger ring och en robust fickklämma som gör det enkelt att använda din taktiska ficklampa.
Produktbeskrivning
SwitchBack® 2.0 monteras säkert mellan lampans tailcap och kropp, vilket ger ett konsekvent grepp under användning från ficka eller väska. Den förbättrar ergonomin vid skytte eller sökning.
Med SwitchBack® 2.0 får du:
- En pålitlig metod för att snabbt ta fram och indexera en ficklampa från både fickor och väskor med hjälp av SwitchBacks styva, men avtagbara, retention ring.
- Möjlighet att skjuta med ett naturligt tvåhandsgrepp (SwitchBack Teknik).
- Användning av traditionella lågljuste tekniker som Neck Index, Modified FBI och Harries.
- Positivt grepp om lampan vid dragning av vapen, omladdning och hantering av problem.
SwitchBack erbjuder snabb användning och förbättrad retention under aktiviteter som klättring, backpacking, bil- och hemunderhåll samt självförsvar.
Nyheter för SwitchBack 2.0:
- En finger ring som släpper under tung kraft/vridning men kan återställas.
- En starkare fickklämma som också fungerar med MOLLE/PALS webbing.
- En fickklämma position som möjliggör något djupare bärande än SwitchBack® Large (original).
- En tubformad del som är skuren lägre för att möjliggöra grepp på båda sidor av tail-cap under installation.
- En bredare tumstöd med greppfunktioner.
- Små krossribbor på SwitchBack 2.0:s kant som skapar en skräddarsydd passform för ett bredare utbud av lampor.
- En aluminium spacer som ökar kompatibiliteten med Streamlight HL och HL-X ficklampor samt andra tillverkare med liknande design.
Installation
För installation, prova först att installera SwitchBack på din lampa utan användning av O-ring eller aluminiumtvätt. Skruva helt enkelt av tailcap, lägg till SwitchBack och skruva tillbaka tailcap. Om lampan inte aktiveras vid användning av tailcap switch med SwitchBack installerad, försök installera aluminiumtvätten som visas i diagrammet nedan. Streamlight-modeller tenderar att kräva aluminiumtvätten, men det kan variera beroende på tailcap-funktionerna på lampan. Elzetta och Surefire-modeller kräver vanligtvis inte aluminiumtvätten, men användare kan upptäcka att tillägg av gummi O-ringen hjälper till att stabilisera positionen av SwitchBack.