SWITCHBACK DF FLASHLIGHT RING WITH POCKET CLIP The SwitchBack® DF adds a multi-function finger ring and robust pocket clip to SureFire’s Dual Fuel Series Flashlights. It mounts securely on the light’s tailcap, providing a repeatable grip index during deployment from pocket or pouch, and enhances ergonomics while shooting or searching. Featuring the same enhanced features as the SwitchBack® 2.0, the SwitchBack DF Flashlight Ring is the ergonomic upgrade your SureFire Dual Fuel tactical flashlight deserves! It features a larger opening to accept the Dual Fuel’s tailcap and includes an additional lock to ensure it stays in place during hard use. FEATURES: Like all our SwitchBacks, it can be used with handguns or long guns, allowing the user to: Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm, reloading, and addressing a malfunction. The SwitchBack DF Flashlight Ring also provides fast deployment and enhanced retention during many activities such as climbing, backpacking, car and home maintenance, and self-defense. A finger ring that releases under heavy force/torque, but can be reset. A strong pocket clip that also works with MOLLE/PALS webbing. A pocket clip position that allows for slightly deeper carry than the SwitchBack® Large (original). A tubular portion that is cut lower to allow grip on both sides of the tail-cap during installation. A wide thumb rest with traction features. Small crush ribs on the SwitchBack DF’s lip create a custom fit. Designed and manufactured in the USA. Installation For installation: Unlock the release ring and hold it below the latch on the tube of the SwitchBack; this will deflect the upper locking finger of the tube’s channel. Insert the tailcap until it’s seated at the bottom of the SwitchBack DF’s tube. Reattach the ring to the latch on the tube: This will capture the tailcap within the SwitchBack DF; you can press the top end of it against the tailcap to help seat it. No additional washers or O-rings are needed for installation, but the SureFire O-ring should stay on the light. Note: You do not need to remove the tailcap from the SwitchBack during battery changes. Caution: When changing batteries, be sure to carefully align the tailcap and body of the flashlight and screw down the tailcap without dislodging the sealing O-ring on the body of the flashlight.
Uppgradera din taktiska belysning med SwitchBack DF Flashlight Ring!
SwitchBack DF Flashlight Ring med fickklämma är en innovativ lösning för att förbättra ergonomin och funktionaliteten hos din SureFire Dual Fuel-serie ficklampa. Denna ring monteras säkert på lampans bakdel och erbjuder en pålitlig greppindex under användning från fickan eller väskan.
Produktbeskrivning
SwitchBack® DF lägger till en multifunktionell fingerring och en robust fickklämma. Den är utformad för att ge ett naturligt tvåhandsgrepp och gör det möjligt att använda traditionella lågljusknep som Neck Index, Modified FBI och Harries.
- Funktioner:
- Kan användas med både pistoler och långvapen.
- Snabbt och pålitligt grepp om ficklampan vid dragning, omladdning och åtgärdande av fel.
- Fingerringen släpper under tung kraft/vridning men kan återställas.
- En stark fickklämma som också fungerar med MOLLE/PALS webbning.
- Utformad för djupare bärposition jämfört med SwitchBack® Large (original).
- Tubformad del som är skuren lägre för bättre grepp vid installation.
- Bred tumstöd med greppfunktioner.
- Små krossribbor på SwitchBack DF:s kant skapar en skräddarsydd passform.
Installation
För installation: Lås upp frigöringsringen och håll den under låset på SwitchBack-röret; detta kommer att avleda det övre låsande fingret i rörets kanal. Sätt in bakdelen tills den sitter i botten av SwitchBack DF:s rör. Fäst ringen på låset på röret: Detta kommer att fånga bakdelen inom SwitchBack DF; du kan trycka den övre änden mot bakdelen för att hjälpa till att sätta den på plats. Inga ytterligare brickor eller O-ringar behövs för installation, men SureFire O-ringen bör förbli på lampan.
Obs: Du behöver inte ta bort bakdelen från SwitchBack vid batteribyten.
Varning: Vid batteribyten, se till att noggrant justera bakdelen och kroppen på ficklampan och skruva ner bakdelen utan att lossa den tättande O-ringen på ficklampans kropp.