Brownells Sverige - Komplett utbud av laddutrustningar, vapendelar, skyttetillbehör, kulor, hylsor och optik Sverige
080000583
Complete, Dedicated Tool Kit For Maintenance & Repair Of Law Enforcement Shotguns
Compact, go-anywhere kit contains all the essential tools needed to disassemble, maintain, and repair today’s common tactical and law enforcement shotguns. Not a run-of-the-mill cleaning kit with generic tools, but a set of carefully selected, high-quality armorer tools designed to perform specific tasks on Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. You’ll have the exact tool you need at your fingertips, without scrounging through a case full of tools for other guns or lugging around unnecessary weight. There’s a universal double-ended forend wrench for easy, non-slip removal of the forend nut without damage. Magazine tube pliers have adjustable, padded, curved jaws for easy removal of mag tubes and stuck magazine caps without marring the finish. T-handle driver comes with correct sockets for removing buttstock bolts, including a self-guiding, sleeved socket for the 870 and a socket for the new action spring tube nut on current-production Remington Model 11-87 Police shotguns (will also fit current 1100). Use the punch set with the brass/nylon head hammer and non-marring bench block to remove retaining pins while protecting the gun’s finish. The full-size #84 Magna-Tip screwdriver comes with the necessary interchangeable bits, including a 12-gauge shotgun choke tube wrench and an extra-long 3/16" Philips head bit for recoil pad screws. Our handy packing hook tool is indispensable for grasping, locating, or releasing springs and small parts. Plenty of compartments inside the water- and tear-resistant, 1000 denier Cordura case let you secure the tools to minimize unwanted shifting and noise. Quiet, #9 YKK nylon zippers with oversize pulls ensure fast, easy access to the tools. Front panel features a clear, I.D. card sleeve, loop strip for name tape, and ¾" wide, nylon grab handles for easy carry.

SPECS: Contains tools for working tactical/law enforcement models of Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. Contents - Magna-Tip screwdriver handle with #210-5 and #270-5 slotted bits, 3⁄16" Philips bit, and Magna-Tip choke tube wrench; 12-gauge shotgun forend wrench; magazine tube/cap pliers; 3⁄8" socket drive, T-handle, and extension with ½” socket, drag link, Rem 870 buttstock bolt socket, and 11⁄16" socket for current-production Rem 1100/11-87 action spring tube nut; nylon/brass hammer; nylon bench block; 6” chain nose pliers; 1⁄16" and 3⁄32" starter punches and pin punches; packing hook; 12-gauge shotgun BoreSnake; ¼ oz. (7.4ml) and double-ended parts cleaning brush. Case - 1000 denier Cordura nylon, O.D. green. 11½” (29.2cm) long, 8½” (21.6cm) high, 3” (7.6cm) thick.

10299 10299 1 SEK
Produktnr: 080000583
BROWNELLS TACTICAL SHOTGUN FIELD MAINTENANCE PACK Kompakt, portabelt kit som innehåller alla nödvändiga verktyg för att demontera, underhålla och reparera dagens vanliga taktiska och lagförstärkningshagelgevär. Inte ett ordinärt rengöringskit med generiska verktyg, utan ett set av noggrant utvalda, högkvalitativa vapensmedsverktyg designade för att utföra specifika uppgifter på Benelli, Mossberg 500/590/835 och Remington 870/1100/11-87 hagelgevär. Du kommer att ha exakt det verktyg du behöver till hands, utan att behöva rota igenom en väska full av verktyg för andra vapen eller bära runt onödig vikt. Det finns en universell dubbelsidig framstocknyckel för enkel, halkfri borttagning av framstockmuttern utan skador. Magasinsrörstången har justerbara, vadderade, böjda käftar för enkel borttagning av magasinsrör och fastsittande magasinkapsyler utan att skada ytan. T-handtagsdrivaren kommer med korrekta uttag för att ta bort kolvskruvar, inklusive en självguidande, hylsad uttag för 870 och ett uttag för den nya aktionsfjäderrörmuttern på nuvarande produktion av Remington Model 11-87 Police hagelgevär (passar även nuvarande 1100). Använd stanssetet med mässing/nylonhuvudhammaren och det icke-märkande arbetsblocket för att ta bort hållande stift samtidigt som vapnets yta skyddas. Den fullstora #84 Magna-Tip skruvmejseln kommer med nödvändiga utbytbara bitar, inklusive en 12-kaliber hagelgevär chokrörnyckel och en extra lång 3/16" Philips huvudbit för rekylplattskruvar. Vårt praktiska packningskrokverktyg är oumbärligt för att gripa, lokalisera eller frigöra fjädrar och smådelar. Gott om fack inuti det vatten- och tårtåliga, 1000 denier Cordura fodralet låter dig säkra verktygen för att minimera oönskad förskjutning och ljud. Tysta, #9 YKK nylonblixtlås med överdimensionerade dragkedjor säkerställer snabb och enkel åtkomst till verktygen. Frampanelen har en klar, I.D. korthylsa, ögla för namnband och ¾" breda, nylonhandtag för enkel bärning.
10299 SEK 1 10 299,00 kr *
Levernastid ca. 14-21 dagar.
1 st. i centrallagret.
Funktioner: Make: Mossberg, Remington, Benelli Modell: 11-87, 1100, 870, 500, 590, Universal Hagelgevär, 835

Produktinformation

Make: Benelli,Mossberg,Remington Modell: 11-87,1100,500,590,835,870,Universal Hagelgevär Leveransvikt: 2,994kg Leveranshöjd: 762mm Leveransbredd: 284mm Leveranslängd: 404mm

Produkt detaljer

Tillverkas i USA



Complete, Dedicated Tool Kit For Maintenance & Repair Of Law Enforcement Shotguns
Compact, go-anywhere kit contains all the essential tools needed to disassemble, maintain, and repair today’s common tactical and law enforcement shotguns. Not a run-of-the-mill cleaning kit with generic tools, but a set of carefully selected, high-quality armorer tools designed to perform specific tasks on Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. You’ll have the exact tool you need at your fingertips, without scrounging through a case full of tools for other guns or lugging around unnecessary weight. There’s a universal double-ended forend wrench for easy, non-slip removal of the forend nut without damage. Magazine tube pliers have adjustable, padded, curved jaws for easy removal of mag tubes and stuck magazine caps without marring the finish. T-handle driver comes with correct sockets for removing buttstock bolts, including a self-guiding, sleeved socket for the 870 and a socket for the new action spring tube nut on current-production Remington Model 11-87 Police shotguns (will also fit current 1100). Use the punch set with the brass/nylon head hammer and non-marring bench block to remove retaining pins while protecting the gun’s finish. The full-size #84 Magna-Tip screwdriver comes with the necessary interchangeable bits, including a 12-gauge shotgun choke tube wrench and an extra-long 3/16" Philips head bit for recoil pad screws. Our handy packing hook tool is indispensable for grasping, locating, or releasing springs and small parts. Plenty of compartments inside the water- and tear-resistant, 1000 denier Cordura case let you secure the tools to minimize unwanted shifting and noise. Quiet, #9 YKK nylon zippers with oversize pulls ensure fast, easy access to the tools. Front panel features a clear, I.D. card sleeve, loop strip for name tape, and ¾" wide, nylon grab handles for easy carry.

SPECS: Contains tools for working tactical/law enforcement models of Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. Contents - Magna-Tip screwdriver handle with #210-5 and #270-5 slotted bits, 3⁄16" Philips bit, and Magna-Tip choke tube wrench; 12-gauge shotgun forend wrench; magazine tube/cap pliers; 3⁄8" socket drive, T-handle, and extension with ½” socket, drag link, Rem 870 buttstock bolt socket, and 11⁄16" socket for current-production Rem 1100/11-87 action spring tube nut; nylon/brass hammer; nylon bench block; 6” chain nose pliers; 1⁄16" and 3⁄32" starter punches and pin punches; packing hook; 12-gauge shotgun BoreSnake; ¼ oz. (7.4ml) and double-ended parts cleaning brush. Case - 1000 denier Cordura nylon, O.D. green. 11½” (29.2cm) long, 8½” (21.6cm) high, 3” (7.6cm) thick.

Nyhetsbrev