Decapping dies are used to remove spent primers from fired cases prior to cleaning. We carry a selection of decapping dies from Sinclair, Redding, RCBS and Lee. All these dies will decap standard cases from 22 to 45 caliber. Redding offers a separate die for cases longer than 2.5 inch and an optional decap rod for their small decap die for PPC, BR, 17, and 20 caliber cases. The Lee and RCBS dies are for standard cases only. The new Sinclair Stainless Decap Die includes pins for standard and PPC/BR flash holes, and an optional rod is available for 17 and 20 caliber cases. Heavy Duty Die is designed for use on Military primer crimped cases larger than .27 caliber.
Mer...
Avfjädringsverktyg används för att ta bort förbrukade tändhattar från avfyrade hylsor innan rengöring. Vi har ett urval av avfjädringsverktyg från Sinclair, Redding, RCBS och Lee. Alla dessa verktyg kan avfjädra standardhylsor från kaliber 22 till 45. Redding erbjuder ett separat verktyg för hylsor längre än 2,5 tum och en valfri avfjädringsstång för deras mindre avfjädringsverktyg för PPC, BR, 17 och 20 kaliberhylsor. Verktygen från Lee och RCBS är endast för standardhylsor. Det nya Sinclair Stainless Decap Die inkluderar stift för standard och PPC/BR tändhålsstorlekar, och en valfri stång finns tillgänglig för 17 och 20 kaliberhylsor. Heavy Duty Die är designat för användning på militära hylsor med tändhattspressning större än kaliber .27.
Mer...
Kundernas betyg påRCBS HEAVY DUTY DECAP DIE .27-45 CALIBER
Antal betyg: 3
Från brownells.com: 3
Medelbetyg: 2,3
Not a complete decap unit.(2016-01-08)
This is just the assembly that goes into the die. I bought this by mistake as I thought it was a complete unit. It has the spring tip as described in the decap die that has a review about breaking the spring.
Great Customer Service, terrible product(2014-12-10)
I bought one of these and decapped ~1000 rounds of 40 before the spring behind the pin got crushed. I emailed RCBS and they volunteered to send me a new pin and new spring. What I actually got was an entire new decapping punch assembly, 4 additional pins, and 3 additional springs. Great! Except, by the time I had decapped 1000 9mm rounds, I had gone through 2 springs already. In another 50, I went through a 3rd. I am on my last spring now and afraid to pull the handle. I have to hand it to RCBS on their customer service, but the design of this die is just not good. the pin hits the primer, compresses the spring and somewhere along the point of the spring compressing, it pops the primer out at light speed. if you run into any but the easiest of primers, however, the spring has to fully compress in order to knock the primer out, and it actually over compresses and gets crunched up inside the punch assembly.
Good product Awesome customer service(2014-08-25)
I picked up this decapping die when I first got into reloading. It makes short work of MOST of the primers and brass. I have only had issues with some 7.62 NATO rounds that have the primer crimped in (even then it's only a few that give me trouble). I'm impressed with the quality but the customer service was just awesome. When I first got this die, I was new to reloading. I was depriming a bunch of .44 Mag brass and without changing the shell holder I put in a 10mm case. The decapping pin didn't go through the flash hole and I broke it. I called RCBS and explained my rookie mistake, the guy on the other end had a laugh and told me he would replace the pin free of charge and send me an extra in case I pull a Dilbert again. Since then, I have had no issues with the product.
Produktnr: 100010269 RCBS HEAVY DUTY DECAP DIE .27-45 CALIBER Tillverkarens produktnummer: 87585076683875853 Avfjädringsverktyg används för att ta bort förbrukade tändhattar från avfyrade hylsor innan rengöring. Vi har ett urval av avfjädringsverktyg från Sinclair, Redding, RCBS och Lee. Alla dessa verktyg kan avfjädra standardhylsor från kaliber 22 till 45. Redding erbjuder ett separat verktyg för hylsor längre än 2,5 tum och en valfri avfjädringsstång för deras mindre avfjädringsverktyg för PPC, BR, 17 och 20 kaliberhylsor. Verktygen från Lee och RCBS är endast för standardhylsor. Det nya Sinclair Stainless Decap Die inkluderar stift för standard och PPC/BR tändhålsstorlekar, och en valfri stång finns tillgänglig för 17 och 20 kaliberhylsor. Heavy Duty Die är designat för användning på militära hylsor med tändhattspressning större än kaliber .27.
489SEK0489,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Funktioner:Kaliber: 270/6.8 mm (.277)Patron: 270/6.8 mm (.277)
Kaliber:
270/6.8 mm (.277)
Patron:
270/6.8 mm (.277)
Leveransvikt: 0,295kgLeveranshöjd: 44mmLeveransbredd: 114mmLeveranslängd: 150mm
Produkt detaljer
Tillverkas i USA
Produktnr: 749015616 RCBS HEAVY DUTY DECAPPING DIE DECAPPING ASSEMBLY 27-45 CAL Tillverkarens produktnummer: 87586076683875860 Avfjädringsverktyg används för att ta bort förbrukade tändhattar från avfyrade hylsor innan rengöring. Vi har ett urval av avfjädringsverktyg från Sinclair, Redding, RCBS och Lee. Alla dessa verktyg kan avfjädra standardhylsor från kaliber 22 till 45. Redding erbjuder ett separat verktyg för hylsor längre än 2,5 tum och en valfri avfjädringsstång för deras mindre avfjädringsverktyg för PPC, BR, 17 och 20 kaliberhylsor. Verktygen från Lee och RCBS är endast för standardhylsor. Det nya Sinclair Stainless Decap Die inkluderar stift för standard och PPC/BR tändhålsstorlekar, och en valfri stång finns tillgänglig för 17 och 20 kaliberhylsor. Heavy Duty Die är designat för användning på militära hylsor med tändhattspressning större än kaliber .27.
199SEK2199,00 kr
*
Levernastid ca. 14-21 dagar. 2 st. i centrallagret.
Produktnr: 749002676 RCBS UNIVERSAL DECAPPING DIE .22-25 CALIBER Tillverkarens produktnummer: 87580076683875808 Avfjädringsverktyg används för att ta bort förbrukade tändhattar från avfyrade hylsor innan rengöring. Vi har ett urval av avfjädringsverktyg från Sinclair, Redding, RCBS och Lee. Alla dessa verktyg kan avfjädra standardhylsor från kaliber 22 till 45. Redding erbjuder ett separat verktyg för hylsor längre än 2,5 tum och en valfri avfjädringsstång för deras mindre avfjädringsverktyg för PPC, BR, 17 och 20 kaliberhylsor. Verktygen från Lee och RCBS är endast för standardhylsor. Det nya Sinclair Stainless Decap Die inkluderar stift för standard och PPC/BR tändhålsstorlekar, och en valfri stång finns tillgänglig för 17 och 20 kaliberhylsor. Heavy Duty Die är designat för användning på militära hylsor med tändhattspressning större än kaliber .27.
499SEK0499,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Decapping dies are used to remove spent primers from fired cases prior to cleaning. We carry a selection of decapping dies from Sinclair, Redding, RCBS and Lee. All these dies will decap standard cases from 22 to 45 caliber. Redding offers a separate die for cases longer than 2.5 inch and an optional decap rod for their small decap die for PPC, BR, 17, and 20 caliber cases. The Lee and RCBS dies are for standard cases only. The new Sinclair Stainless Decap Die includes pins for standard and PPC/BR flash holes, and an optional rod is available for 17 and 20 caliber cases. Heavy Duty Die is designed for use on Military primer crimped cases larger than .27 caliber.
Mer...
Avfjädringsverktyg används för att ta bort förbrukade tändhattar från avfyrade hylsor innan rengöring. Vi har ett urval av avfjädringsverktyg från Sinclair, Redding, RCBS och Lee. Alla dessa verktyg kan avfjädra standardhylsor från kaliber 22 till 45. Redding erbjuder ett separat verktyg för hylsor längre än 2,5 tum och en valfri avfjädringsstång för deras mindre avfjädringsverktyg för PPC, BR, 17 och 20 kaliberhylsor. Verktygen från Lee och RCBS är endast för standardhylsor. Det nya Sinclair Stainless Decap Die inkluderar stift för standard och PPC/BR tändhålsstorlekar, och en valfri stång finns tillgänglig för 17 och 20 kaliberhylsor. Heavy Duty Die är designat för användning på militära hylsor med tändhattspressning större än kaliber .27.
Mer...
Kundernas betyg påRCBS HEAVY DUTY DECAP DIE .27-45 CALIBER
Antal betyg: 3
Från brownells.com: 3
Medelbetyg: 2,3
Not a complete decap unit.(2016-01-08)
This is just the assembly that goes into the die. I bought this by mistake as I thought it was a complete unit. It has the spring tip as described in the decap die that has a review about breaking the spring.
Great Customer Service, terrible product(2014-12-10)
I bought one of these and decapped ~1000 rounds of 40 before the spring behind the pin got crushed. I emailed RCBS and they volunteered to send me a new pin and new spring. What I actually got was an entire new decapping punch assembly, 4 additional pins, and 3 additional springs. Great! Except, by the time I had decapped 1000 9mm rounds, I had gone through 2 springs already. In another 50, I went through a 3rd. I am on my last spring now and afraid to pull the handle. I have to hand it to RCBS on their customer service, but the design of this die is just not good. the pin hits the primer, compresses the spring and somewhere along the point of the spring compressing, it pops the primer out at light speed. if you run into any but the easiest of primers, however, the spring has to fully compress in order to knock the primer out, and it actually over compresses and gets crunched up inside the punch assembly.
Good product Awesome customer service(2014-08-25)
I picked up this decapping die when I first got into reloading. It makes short work of MOST of the primers and brass. I have only had issues with some 7.62 NATO rounds that have the primer crimped in (even then it's only a few that give me trouble). I'm impressed with the quality but the customer service was just awesome. When I first got this die, I was new to reloading. I was depriming a bunch of .44 Mag brass and without changing the shell holder I put in a 10mm case. The decapping pin didn't go through the flash hole and I broke it. I called RCBS and explained my rookie mistake, the guy on the other end had a laugh and told me he would replace the pin free of charge and send me an extra in case I pull a Dilbert again. Since then, I have had no issues with the product.