Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The RCBS seater dies for bottleneck cases will seat bullets correctly in full length sized cases or neck sized cases. These seater dies have a built-in crimp ring to enable you to crimp the case into the bullet if you wish to. The seater die is easily adjusted to crimp or not to crimp by raising or lowering the die position in the press. Full length 2 die sets are the basic building block of the reloading process. Many shooters wear out multiple barrels or rifles using just one full length reloading die set. We recommend that new reloaders start with a full length die set and learn how to set the dies up correctly before they jump in to other types of reloading dies.
Fullängd die-set för precisionsladdning av ammunition
FULL LENGTH DIE SETS, FULL LENGTH 2-DIE SET 7MM WSM från RCBS är den perfekta lösningen för både bottleneck gevärs- och pistolhylsor. Dessa die-set inkluderar en fullängdssizing die och en seating die, vilket gör dem oumbärliga för noggrann ammunitionstillverkning.
Produktbeskrivning
Fullängd die-seten är utformade för att:
- Bumpa axeln på hylsan när die'n justeras upp eller ner i pressen.
- Ge en korrekt axelbump genom att använda ett cartridge headspace gage tool.
- Sizea kroppen av hylsan så att den enkelt kan kammare för nästa avfyrning.
- Decapera den använda tändhatten.
Expanderbollen passerar genom hylsans nacke och ger rätt spänning på nacken. Observera att hylsorna måste smörjas innan fullängds-sizing.
Seating Die
RCBS seating dies för bottleneck-hylsor sätter kulor korrekt i fullängds-sized eller nack-sized hylsor. Dessa seating dies har en inbyggd crimp-ring som gör det möjligt att crimpa hylsan runt kulan om så önskas. Justeringen av seating die'n är enkel; du kan enkelt justera för att crimpa eller inte crimpa genom att höja eller sänka die-positionen i pressen.
Rekommendation
Full length 2-die set är den grundläggande byggstenen i omladdningsprocessen. Många skyttar sliter ut flera pipor eller gevär genom att använda endast en fullängd omladdnings die-set. Vi rekommenderar att nya omladdare börjar med en fullängd die-set och lär sig att ställa in die's korrekt innan de går vidare till andra typer av omladdnings die's.