Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The RCBS seater dies for bottleneck cases will seat bullets correctly in full length sized cases or neck sized cases. These seater dies have a built-in crimp ring to enable you to crimp the case into the bullet if you wish to. The seater die is easily adjusted to crimp or not to crimp by raising or lowering the die position in the press. Full length 2 die sets are the basic building block of the reloading process. Many shooters wear out multiple barrels or rifles using just one full length reloading die set. We recommend that new reloaders start with a full length die set and learn how to set the dies up correctly before they jump in to other types of reloading dies.
Full Length Die Sets för precision och kvalitet
FULL LENGTH 2-DIE SET 8X57MM MAUSER från RCBS är det perfekta valet för både nybörjare och erfarna handladdare. Dessa dies är designade för att säkerställa att dina patroner är av högsta kvalitet och prestanda.
Produktbeskrivning
Full length die sets är avsedda för bottleneck-rifle och pistolhylsor och inkluderar:
- En full length sizing die
- En seater die
Den full length die kommer att justera axeln på hylsan när den justeras upp eller ner i pressen. Vi rekommenderar att använda ett cartridge headspace gage tool för att få rätt axeljustering. Den full length die formar även kroppen på hylsan så att den enkelt kan gå in i kammaren för nästa avfyrning, och die decapper den använda tändhatten.
Expanderbollen passerar genom hylsans hals och formar den till rätt spänning. Hylsor måste smörjas innan full length sizing. RCBS seater dies för bottleneck-hylsor sätter kulor korrekt i full length sized hylsor eller neck sized hylsor. Dessa seater dies har en inbyggd crimp ring som gör att du kan crimp hylsan runt kulan om så önskas.
Seater die är lätt att justera för att crimp eller inte crimp genom att höja eller sänka die-positionen i pressen. Full length 2 die sets är byggstenarna i handladdningsprocessen. Många skyttar sliter ut flera pipor eller gevär genom att endast använda ett full length handladdningsdie-set. Vi rekommenderar att nya handladdare börjar med ett full length die-set och lär sig att ställa in dies korrekt innan de går vidare till andra typer av handladdningsdies.