Över 300 000 kunder - vi säger tack!

40 000+ produkter inom jakt och skytte

Sinclair Bullet Sorting Stand gör det enkelt att snabbt och noggrant sortera kulor efter base till ogive längd på en stabil, platt granitbas.
-10 %

SINCLAIR INTERNATIONAL BULLET SORTING STAND WITHOUT INDICATOR

749011470
Varianter
Filter:
Variations:

Varianter:

-10 %
Kaliber: Universal Produktnr: 749011470
Lagervara
949 SEK 6 949 kr * 1 049 kr
-9 %
BULLET SORTING STAND - BULLET SORTING STAND WITH DIAL INDICATOR
1499 SEK 13 1 499 kr * 1 649 kr
Lagervara
Kaliber: Universal Produktnr: 749011469
Lagervara
1499 SEK 13 1 499 kr * 1 649 kr
Kaliber: Universal Produktnr: 749101349
Order kan placeras
2549 SEK 0 2 549 kr *
949 2549 3 SEK
-10 %
MSRP 1 049 kr
949 SEK 949 kr

Priser inkl. moms, exkl. frakt

Produktnr: 749011470

SINCLAIR Bullet Sorting Stand gör det möjligt för dig att snabbt och noggrant sortera kulor efter bas till ogivlängd. Den svarta granitbasen är helt plan och tillräckligt tung för att stanna där du vill ha den på din laddningsbänk. Den medföljande mätinstrumentet har en spakkontroll för enkel insättning och borttagning av kulor i komparatorerna. Bullet Sorting Stand-komparatorer säljs separat och finns i kaliber 22, 6mm, 6.5mm, 7mm, 30 kaliber och 338 kaliber, eller kan användas med någon av våra hex-komparatorer.
Lagervara 6 st. i centrallagret.
1
2
3
4
5
6
7
8
9
10+
-10 %
MSRP 1 049 kr
949 kr

Priser inkl. moms, exkl. frakt

1
2
3
4
5
6
7
8
9
10+

Levernastid ca. 14-21 dagar.

Levernastid ca. 14-21 dagar.

Inga avgifter förrän vi skickar.
Inga avgifter:
Ditt kreditkort debiteras inte när du lägger din beställning.

Inga förpliktelser:
Du har inga förpliktelser förrän varorna har skickats. Du kan när som helst avbryta din beställning före leverans – utan kostnad.

Först vid leverans:
Ditt kreditkort debiteras först när vi skickar din beställning. Inte innan.
  • Snabb och exakt sortering
  • Stabil svart granitbas
  • Enkel användning med indikator
949 2549 3 SEK
Beskrivning Specification Kundrecensioner Accessories

SINCLAIR INTERNATIONAL BULLET SORTING STAND WITHOUT INDICATOR

-10 %
MSRP 1 049 kr
949 SEK 949 kr

Priser inkl. moms, exkl. frakt

1
2
3
4
5
6
7
8
9
10+
-10 %
MSRP 1 049 kr
949 kr

Priser inkl. moms, exkl. frakt

1
2
3
4
5
6
7
8
9
10+

Levernastid ca. 14-21 dagar.

Beskrivning:

Visa original (engelska)

Snabb och exakt sortering av kulor!

Sinclair Bullet Checker Stand gör det möjligt att snabbt och noggrant sortera kulor efter bas till ogive-längd. Den svarta granitbasen är perfekt plan och tillräckligt tung för att stanna där du vill ha den på din laddningsbänk.

Produktinformation

  • Inkluderad: Dialindikator med spakkontroll för enkel inmatning och borttagning av kulor i komparatorer.
  • Komparatorer: Bullet Checker Stand Komparatorer säljs separat och finns i kaliber 22, 6mm, 6.5mm, 7mm, 30 kaliber och 338 kaliber eller kan användas med våra hex-komparatorer.

Uppgradera din sorteringsprocess med Sinclair Bullet Sorting Stand – det perfekta verktyget för alla skytteentusiaster!



Produktinformation

  • Kaliber:
    Universal
  • Leveransvikt: 1,066kg
  • Leveranshöjd: 112mm
  • Leveransbredd: 140mm
  • Leveranslängd: 198mm

Produkt detaljer

Tillverkas i USA

Kundrecensioner

Kundbetyg (11)

3,7 / 5
Rekommenderar

Brownells USA Lowered my Std Deviation 2017-11-03

This is a really nice tool that is well-built. The marble block is heavy and the tool is quick & easy to set up. I measure base to ogive & sort into groups. Bullets aren't perfect, so when you push them gently into this comparator, they will deform slightly, and you may get different readings - depending on how hard you push the bullets into the comparator. Also, (most importantly) the base of most bullets are not flat - they are usually slightly concave (dish shaped) and you will get different readings, depending there the gauge contacts the base. Neither inaccuracies are the fault of this comparator - they are just part of the inconsistencies of bullet making. Most of the bullet length variance seems to be in the nose length & shape of the meplat (tip). I try to adjust seating depth so that a consistent amount of bullet base is going into the case. I ignore the overall loaded cartridge length. I have been getting lots of sub-6fps standard deviations when doing load testing with this method. Now, if I could just get a nice bullet seater that indexes off the ogive, rather than near the tip or half-way down the nose.

Rekommenderar

Brownells USA Great tool for accuracy 2017-03-14

If they read and edit these hopefully this review will get published and my previous one deleted. After living with this thing for a year and using it on and off, I finally figured out how to make it work for me. I have the slug type caliber blocks but the HEX nut comparator actually works better for me. Get some sorting bins, at least 8. Number from 2 to 8 or whatever. Start gaging bullets and pay attention to just the 3rd digit after the decimal and drop into the corresponding bins. You will have bullets sorted to approximately 0.001". The gage has a stated accuracy of plus or minus same. So if you have a #5 bin full of bullets, based on the gage accuracy you should actually be between 0.XX4" and 0.XX6". That's as good as this setup will get you. Cheers!

Varianter:

-10 %
Kaliber: Universal Produktnr: 749011470
Lagervara
949 SEK 6 949 kr * 1 049 kr
-9 %
BULLET SORTING STAND - BULLET SORTING STAND WITH DIAL INDICATOR
1499 SEK 13 1 499 kr * 1 649 kr
Lagervara
Kaliber: Universal Produktnr: 749011469
Lagervara
1499 SEK 13 1 499 kr * 1 649 kr
Kaliber: Universal Produktnr: 749101349
Order kan placeras
2549 SEK 0 2 549 kr *

Visste du?

Tillverkarinformation

Ansvarig ekonomisk aktör enligt EU-förordningen

Brownells Sverige AB
Box 99
793 22 Leksand
Sverige
info@brownells.se

Oj! Något gick fel.

Vi stötte på ett fel när vi laddade innehållet. Vänligen uppdatera sidan för att fortsätta. Om problemet kvarstår, kontakta vår kundtjänst.

Tillbaka till toppen