The FL dies is used to size the cartridge case on full length.
In addition to a removable expander our FL dies have an integrated primer ejector pin.
All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort.
Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension.
The correct position of the die in the press is set with the lock nut.br>
Specs:
- Thread: 7/8''
- Expander (diameter): 6.66mm
All relevant components have an article number for easy reordering if necessary.
You will find further instructions and assistance in selecting accessories and spare parts in the manual.>The manual can be found here<
Upplev precisionen med TRIEBEL Full Length Dies för gevärskalibrar
TRIEBEL Full Length Die 6.5x55 SE - 7/8'' är det perfekta verktyget för att säkerställa att dina patronhylsor är korrekt dimensionerade för optimal prestanda. Dessa dies är utformade för att ge full längd sizing av patronhylsan.
Produktbeskrivning
FL dies används för att dimensionera patronhylsan i full längd. Förutom en avtagbar expander har våra FL dies en integrerad tändhattutdragare. Alla använda spindlar, expander och utdragare kan enkelt bytas ut vid behov med minimal ansträngning.
Kalibrering sker när patronhylsan trycks in i dies. Hylsans nacke kalibreras från insidan när den dras ut ur dies, vilket formar patronhylsan och uppnår korrekt nackspänning. Den korrekta positionen för dies i pressen ställs in med hjälp av låsnut.
Specifikationer
- Gänga: 7/8''
- Expander (diameter): 6.66mm
Alla relevanta komponenter har ett artikelnummer för enkel beställning vid behov. Ytterligare instruktioner och hjälp med att välja tillbehör och reservdelar finns i manualen.
Manualen kan hittas här