The FL dies is used to size the cartridge case on full length.
In addition to a removable expander our FL dies have an integrated primer ejector pin.
All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort.
Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension.
The correct position of the die in the press is set with the lock nut.
Specs:
- Thread: 1 1/4''
- Expander (diameter): 9.50mm
All relevant components have an article number for easy reordering if necessary.
You will find further instructions and assistance in selecting accessories and spare parts in the manual.>The manual can be found here<
TRIEBEL Full Length Dies för gevärskalibrar
TRIEBEL Full Length Die - 9.5x77 - 1 1/4'' är det perfekta verktyget för att styra storleken på hylsan i full längd. Dessa dies erbjuder en högkvalitativ lösning för alla dina ammunitionstillverkningsbehov.
Produktbeskrivning
FL dies används för att storleksanpassa hylsan i full längd. Förutom en avtagbar expander har våra FL dies en integrerad tändstiftutdragningspinne. Alla använda spindlar, expander och utdragningspinne kan enkelt bytas ut vid behov med lite ansträngning. Kalibreringen sker när hylsan trycks in i die'n. Hylsans nacke kalibreras från insidan när den dras ut ur die'n. Detta formar hylsan och uppnår en korrekt nackspänning.
Den korrekta positionen för die'n i pressen ställs in med låsmuttern.
Specifikationer
- Gänga: 1 1/4''
- Expander (diameter): 9.50mm
Alla relevanta komponenter har ett artikelnummer för enkel beställning vid behov. Du hittar ytterligare instruktioner och hjälp med att välja tillbehör och reservdelar i manualen.
Manualen kan hittas här.