Interchangeable Design Gives Constant Spring Pressure For Precise Mating Of Locking Lug Recesses
Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit popular actions listed below.
SPECS: 3¾" (9.5cm) long, ¾ lb. (340 g). M14/M1A Set sleeve includes large diameter plunger and special lapping handle required for these models. Mauser Large sleeve fits large ring Mauser actions. Mauser Small fits small ring Mauser actions. Savage Small sleeve fits Savage actions in all calibers except Rem Ultra Mag (RUM), Rem SA Ultra Mag (RSUM), and Win Short Mag (WSM). Savage Large sleeve fits Savage actions on ly in RUM, RSUM, and WSM calibers. One Gun Set contains bolt tool body, plunger, and correct size sleeve for model listed. M14/M1A One Gun Set contains bolt tool body, large diameter plunger, correct size sleeve, and special sleeve, and special bolt lapping tool unique to M14/M1A/M1 Garand only. Kit contains all tools necessary to lap all models listed in chart. */**Special price, see below.
Mer...
Kundernas betyg påBROWNELLS ONE GUN BOLT LAPPING SET FITS REMINGTON 700
Antal betyg: 1
Från brownells.com: 1
Medelbetyg: 5
Very nice fit of parts.(2015-08-31)
I bought this one-gun kit after trying to use the plunger body from the M14/M1/M1A kit. It did not fit a sleeve I had bought for the Large Ring Mauser. After receiving this kit with it's plunger body I then began trying all the parts one at a time.
Both plunger bodies are 0.5620" and the sleeves are 0.5625 except the M14, it was 0.563. There were little burrs on the plunger body of the M14 kit that made me think it would not fit the different sleeves. All fit well after a little lapping.
I plan on using the bolt lug lapping tool for several rifles I am building. After using the tool I believe I can use it to square the bolt face on a Mauser Large Ring VZ-24. After reaming the sleeve from existing 9/16" to a 5/8" I will press fit a drill bushing that is 5/8 x 3/8 and use the Mason Reamer Burr which has a 3/8" shaft. The Burr has been ground to 0.3740 to 0.3745. It has a buttery slip fit in the Drill Bushing.
Mauser threads are at a 55 deg pitch and not easy to find. Brownells sells the sleeve with the right threads for the '98 and the face truing Burrs. All you need is the drill bushing, the undersized drill, and the reamer to make the altered sleeve to be able to Lapp the lugs with the original unaltered sleeve, and true the face of your bolt with your altered sleeve. After, of course, you check that the receivers threads are true to the action. This can be checked with a mandrel which Brownells has too. This can be done for any rifle that Brownells has a sleeve for. Happy Gunsmithing, JL.
Produktnr: 080097701 BROWNELLS ONE GUN BOLT LAPPING SET FITS REMINGTON 700 Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
Produktnr: 080097100 BROWNELLS BOLT TOOL BODY Tillverkarens produktnummer: BOLTBODYONLYBOLTBODYONLY Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
Produktnr: 080097101 BROWNELLS M1A/M14 1-GUN BOLT LAPPING SET Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
Make:
Springfield
Modell:
M1,M14,M1A
Leveransvikt: 0,204kgHöjd: 18mmBredd: 76mmLängd: 183mm
Produkt detaljer
Tillverkas i USA
Produktnr: 080097700 BROWNELLS INDIVIDUAL THREAD SLEEVE FITS REMINGTON 700 Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
Produktnr: 080097002 BROWNELLS INDIVIDUAL THREAD SLEEVE FITS SAVAGE LARGE Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
379SEK1379,00 kr
*
1 på lager
Funktioner:Make: Savage ArmsModell: Universal Gevär
Produktnr: 080097005 BROWNELLS ONE GUN BOLT LAPPING SET FITS SAVAGE LARGE Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
1499SEK31 499,00 kr
*
3 på lager
Funktioner:Make: Savage ArmsModell: Universal Gevär
Produktnr: 080097000 BROWNELLS BOLT LAPPING TOOL KIT Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
3999SEK03 999,00 kr
*
Produkten kan beställas som restorder.
Funktioner:Make: Springfield, Mauser, Savage ArmsModell: M14, M1A, Universal Gevär
Produktnr: 080097014 BROWNELLS GARAND THREADED SLEEVE & LAPPING HANDLE Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
Make:
Springfield
Modell:
M14,M1A
Leveransvikt: 0,113kgHöjd: 28mmBredd: 71mmLängd: 157mm
Produkt detaljer
Tillverkas i USA
Produktnr: 080097070 BROWNELLS INDIVIDUAL THREAD SLEEVE FITS WINCHESTER 70 Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
Produktnr: 080097096 BROWNELLS INDIVIDUAL THREAD SLEEVE FITS MAUSER SMALL Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
Produktnr: 080097098 BROWNELLS INDIVIDUAL THREAD SLEEVE FITS MAUSER LARGE Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
Produktnr: 080097113 BROWNELLS BOLT TOOL BODY & M14/M1A LARGE PLUNGER ONLY Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
Make:
Springfield
Modell:
M1,M14,M1A
Leveransvikt: 0,091kgHöjd: 13mmBredd: 43mmLängd: 145mm
Produkt detaljer
Tillverkas i USA
Produktnr: 080097170 BROWNELLS ONE GUN BOLT LAPPING SET FITS WINCHESTER 70 Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
Produktnr: 080097196 BROWNELLS ONE GUN BOLT LAPPING SET FITS MAUSER SMALL Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
Produktnr: 080097198 BROWNELLS ONE GUN BOLT LAPPING SET FITS MAUSER LARGE Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
Produktnr: 080097004 BROWNELLS ONE GUN BOLT LAPPING SET FITS SAVAGE SMALL Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
1499SEK01 499,00 kr
*
Produkten kan beställas som restorder.
Funktioner:Make: Savage ArmsModell: Universal Gevär
Produktnr: 080097001 BROWNELLS INDIVIDUAL THREAD SLEEVE FITS SAVAGE SMALL Fjäderbelastade verktyg ger konstant, rak-back tryck att hålla bult klackarna torget mot mottagaren samtidigt läppning med 600-800 grus, kiselkarbid slipande. Ger bättre resultat än enbart tumtryck. Utbytbara gängade hylsor passar populära åtgärder som anges nedan.
379SEK0379,00 kr
*
Produkten kan beställas som restorder.
Funktioner:Make: Savage ArmsModell: Universal Gevär
Interchangeable Design Gives Constant Spring Pressure For Precise Mating Of Locking Lug Recesses
Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit popular actions listed below.
SPECS: 3¾" (9.5cm) long, ¾ lb. (340 g). M14/M1A Set sleeve includes large diameter plunger and special lapping handle required for these models. Mauser Large sleeve fits large ring Mauser actions. Mauser Small fits small ring Mauser actions. Savage Small sleeve fits Savage actions in all calibers except Rem Ultra Mag (RUM), Rem SA Ultra Mag (RSUM), and Win Short Mag (WSM). Savage Large sleeve fits Savage actions on ly in RUM, RSUM, and WSM calibers. One Gun Set contains bolt tool body, plunger, and correct size sleeve for model listed. M14/M1A One Gun Set contains bolt tool body, large diameter plunger, correct size sleeve, and special sleeve, and special bolt lapping tool unique to M14/M1A/M1 Garand only. Kit contains all tools necessary to lap all models listed in chart. */**Special price, see below.
Mer...
Kundernas betyg påBROWNELLS ONE GUN BOLT LAPPING SET FITS REMINGTON 700
Antal betyg: 1
Från brownells.com: 1
Medelbetyg: 5
Very nice fit of parts.(2015-08-31)
I bought this one-gun kit after trying to use the plunger body from the M14/M1/M1A kit. It did not fit a sleeve I had bought for the Large Ring Mauser. After receiving this kit with it's plunger body I then began trying all the parts one at a time.
Both plunger bodies are 0.5620" and the sleeves are 0.5625 except the M14, it was 0.563. There were little burrs on the plunger body of the M14 kit that made me think it would not fit the different sleeves. All fit well after a little lapping.
I plan on using the bolt lug lapping tool for several rifles I am building. After using the tool I believe I can use it to square the bolt face on a Mauser Large Ring VZ-24. After reaming the sleeve from existing 9/16" to a 5/8" I will press fit a drill bushing that is 5/8 x 3/8 and use the Mason Reamer Burr which has a 3/8" shaft. The Burr has been ground to 0.3740 to 0.3745. It has a buttery slip fit in the Drill Bushing.
Mauser threads are at a 55 deg pitch and not easy to find. Brownells sells the sleeve with the right threads for the '98 and the face truing Burrs. All you need is the drill bushing, the undersized drill, and the reamer to make the altered sleeve to be able to Lapp the lugs with the original unaltered sleeve, and true the face of your bolt with your altered sleeve. After, of course, you check that the receivers threads are true to the action. This can be checked with a mandrel which Brownells has too. This can be done for any rifle that Brownells has a sleeve for. Happy Gunsmithing, JL.